HP Integrated Lights-Out 4 - Manual (Page 24)

1. Navigate to the iLO Federation
→Group Virtual Media page, as shown in
Figure 6 (page 24) .
Figure 6 Group Virtual Media page
2. Select a group from the Selected Group menu.
All of the systems in the selected group will be affected by the changes you make on this page.
3. Enter the URL for the scripted media in the Scripted Media URL box in the Connect Virtual
Floppy section (.img files) or the Connect CD/DVD-ROM section (.iso files).
4. Select the Boot on Next Reset check box if the servers in the group should boot to this image
only on the next server reboot.
The image will be ejected automatically on the second server reboot so that the servers do
not boot to this image twice.
If this check box is not selected, the image will remain connected until it is manually ejected,
and the servers will boot to it on all subsequent server resets, if the system boot options are
configured accordingly.
5. Click Insert Media.
Viewing and ejecting scripted media for groups
When scripted media is connected to the systems in an iLO Federation group, the following details
are listed in the Virtual Floppy Status section and Virtual CD/DVD-ROM Status section:
•
Image Inserted—The Virtual Media type that is connected. Scripted media is displayed when
scripted media is connected.
•
Connected—Indicates whether a Virtual Media device is connected.
•
Image URL—The URL that points to the connected scripted media.
To eject scripted media devices:
1.
Navigate to the iLO Federation
→Group Virtual Media page.
2. Select a group from the Selected Group menu.
All of the systems in the selected group will be affected by the changes you make on this page.
3. Click the Eject Media button in the Virtual Floppy Status section or Virtual CD/DVD-ROM Status
section.
24 Using the iLO Federation features