HP Surestore 6164 Switch - Manual (Page 26)

5-2 Zoning User’s Guide
Detailed Zoning Examples
5
test180_Jr:admin> qlPortEnable 2
Setting port to Quick Loop mode,
Committing configuration...done.
Activate looplet 2
test180_Jr:admin>
---------------------------------------------------------------------------------
On switch 2...
<Set QuickLoop partner and enable QuickLoop ports on switch 2>
test181_Jr:admin> qlPartner “10:00:00:60:69:00:00:11
Setting Quick Loop to dual-switch mode,
Committing configuration...done.
test181_Jr:admin>
test181_Jr:admin>qlPortEnable 3
Setting port to QuickLoop mode,
Committing configuration...done.
Activate looplet 3
test181_Jr:admin> qlPortEnable 4
Setting port to Quick Loop mode,
Committing configuration...done.
Activate looplet 4
test181_Jr.admin>
---------------------------------------------------------------------------------
<Create aliases for devices>
test180_Jr:admin> aliCreate “Private_ServerA”, “1,3”
test180_Jr:admin> aliCreate “Private_ServerB”, “1,4”
test180_Jr:admin> aliCreate “Private_StorageA”, “2,2”
test180_Jr:admin> aliCreate “Private_StorageB”, “2,1”
test180_Jr:admin> aliCreate “Fabric_ServerA”, “50:06:0b:00:00:06:9a:d6”
test180_Jr:admin> aliCreate “Fabric_ServerB”, “50:06:0b:00:00:06:ad:10”
est180_Jr:admin> aliCreate “Fabric_StorageA”, “50:06:04:82:bc:01:9a:1b”
test180_Jr:admin> aliCreate “Fabric_StorageB”, “50:06:04:82:bc:01:9a:1c”
<Create a configuration including QuickLoop and Fabric Zones>