HP Pavilion a387x Desktop PC - Manual (Page 135)

upgrading and servicing the pc (2) 127
9 Hold the memory module in alignment with the socket, aligning the notches
with the bumps.
DIMM DDR DIMM
10 Push straight down on top of the memory module until it is fully seated in the
socket. The retaining clips on the ends of the socket automatically lock it into
position when the memory module is fully seated.
To reassemble the computer:
1 If you moved any cabling, restore the cable connections and routing.
2 Replace the fan duct and the side panel (see “closing the computer” on
page 140).
3 Reconnect the power cord and all other cables.
4 Reconnect the modem/telephone cable.
5 Turn on the computer and all peripherals.
removing a memory module
1 Turn off the computer and all peripherals.
2 Disconnect the modem/telephone cable.
3 Disconnect the power cord and all other attached cables (such as the
keyboard, mouse, and monitor).
4 Remove the side panel and the fan duct (see “removing the side panel” on
page 121 and “removing the fan duct” on page 122).
5 Locate the memory sockets on the motherboard.
6 Move any cabling out of the way, if necessary.