Table 3 2 information logs, Table 3 -2. information logs -21 – HP Optical Jukeboxes User Manual
Page 59
Chapter 3
3-21
Operating the Jukebox
Using the Front Panel Features
Operat
ing t
h
e
Jukebo
x
Start with READY or SECURE in the display.
1. Press
NEXT
until INFO * appears in the display window.
2. Press
ENTER
. A flashing 0 displays
3. Press
NEXT
until the desired log number displays.
4. Press
ENTER
. If you select any log except 4 (drive cartridge loads), the
log information displays immediately.
If you select log 4, DRIVE 1 displays and you can press
ENTER
for Drive
1 information. If your jukebox has two optical drives, you can press
NEXT
(DRIVE 2 displays) and
ENTER
to access Drive 2 information.
5. Press
ENTER
to stop the INFO * display.
To choose another log, press
NEXT
or
PREV
.
6. Press
CANCEL
to return to READY.
Table 3 -2
Information Logs
No.
Description
1
Firmware revision of the jukebox
4
Total cartridge loads for the drive.
5
Operation hours (power on time)
9
Total moves and move attempts by the
disk transport mechanism.
12
Total disk transport mechanism flips.
14
Total mailslot rotations.
16
Optical drive 1 SCSI ID.
17
Optical drive 2 SCSI ID (if installed)
Other logs are used by service.