HP XC System 3.x Software User Manual
Page 122
Advertising
If myjob runs on an HP XC host, the SLURM[nodes=4-4] allocation option is applied. If it runs on
an Alpha/AXP host, the SLURM option is ignored.
•
Run myjob on any host type, and apply allocation options appropriately:
$ bsub-n 8 -R "type==any" \
-ext "SLURM[nodes=4-4];RMS[ptile=2]" myjob
If myjob runs on an HP XC host, the SLURM[nodes=4-4] option is applied. If myjob runs on an
HP AlphaServer SC host, the RMS ptile option is applied. If it runs on any other host type, the
SLURM and RMS options are ignored.
122
Examples
Advertising