HP Officejet 6100 - Manual (Page 119)

Set up the printer for wireless communication
You can set up the printer for wireless communication.
This section contains the following topics:
•
Before you begin
• Set up the printer on your wireless network
• Change the connection type
• Test the wireless connection
• Guidelines for ensuring wireless network security
• Guidelines for reducing interference on a wireless network
NOTE: If you encounter problems connecting the printer, see Solve wireless problems.
TIP: For more information about setting up and using the printer wirelessly, visit the HP
Wireless Printing Center (www.hp.com/go/wirelessprinting).
Before you begin
Before you begin setting up the wireless connection, check the following:
•
The printer is not connected to the network using a network cable.
• The wireless network is set up and functioning correctly.
• The printer and the computers that use the printer are on the same network (subnet).
While connecting the printer, you might be prompted to enter the wireless network name (SSID)
and a wireless password:
•
The wireless network name is the name of your wireless network.
• The wireless password prevents other people from connecting to your wireless network
without your permission. Depending on the level of security required, your wireless network
might use either a WPA key or WEP passphrase.
If you have not changed the network name or the security passkey since setting up your wireless
network, you can sometimes find them on the back or side of the wireless router.
If you cannot find the network name or the security passkey or cannot remember this information,
see the documentation available with your computer or with the wireless router. If you still cannot
find this information, contact your network administrator or the person who set up the wireless
network.
TIP: If you are using a computer running Windows, HP provides a tool called HP Home
Network Diagnostic Utility that can help retrieve this information for some systems. To use this
tool, visit the HP Wireless Printing Center www.hp.com/go/wirelessprinting, and then click
Network Diagnostic Utility in the Quick Links section. (At this time, this tool might not be
available in all languages.)
Set up the printer on your wireless network
To set up the printer on your wireless network, use one of the following methods:
•
Set up the printer using the HP printer software (Recommended)
• Set up the printer using WiFi Protected Setup (WPS)
• Set up the printer using the embedded web server (EWS)
NOTE: If you have already been using the printer with a different type of connection, such as
a USB connection, follow the instructions in Change the connection type to set up the printer
on your wireless network.
Set up the printer for wireless communication 115