HP SAN - Manual (Page 12)

4. Review and accept the license agreement.
By default, the HP StorageWorks SAN Visibility files and documentation are installed in the
following folder:
<Install_Dir>\Hewlett-Packard\HP SANVisibility
A message is displayed on completion of the SAN Visibility software installation.
NOTE:
Ensure that JRE1.5 Update 1 (or higher) is installed on the host.
Removing SAN Visibility
To remove the HP StorageWorks SAN Visibility software, complete the following steps:
1. Select Start > Settings > Control Panel > Add or Remove Programs.
2. Select HP StorageWorks SAN Visibility v5.1 from the list of Currently Installed Programs.
NOTE:
Before removing HP StorageWorks SAN Visibility 5.1 from your system, ensure that you
close all the applications.
3. Click Change/Remove, and follow the steps to remove the program.
A message is displayed confirming the successful removal of the SAN Visibility software.
NOTE:
Removal of SAN Visibility does not remove the existing SAN Visibility reports and profiles
from the installation directory.
Installing and removing SAN Visibility 12