HP Business Inkjet 2600 Printer series User Manual
Page 35
ENWW
4-3
Step 2: Verify that the printer works
1
Connect the power cord and turn on the printer.
2
Press
M
ENU
on the LCD control panel repeatedly until
INFORMATION
appears.
3
Press
I
TEM
repeatedly until
PRINT CONFIGURATION PAGE
appears.
4
Press
S
ELECT
to print the configuration page.
Note
Because you have installed an HP Jetdirect print server, two
configuration pages print. The HP Jetdirect Configuration Page contains
setup information (for example, LAN HW ADDRESS) that might be
needed for the next step.
Step 3: Install the printer software
Install the PCL 5C or Postscript printer driver from the Starter CD. For
more information, see “Install the printer software and connect the
interface cable.”
Note
For more information about setting up and using the HP Jetdirect print
server, see its guide
on the Starter CD.