HP PSC 2210xi All-in-One Printer - Manual (Page 67)

remove and reinstall your hp psc software 61
hp psc 2200 series
connecting to the USB port on your computer
connect your
hp psc to more
than one
computer You can connect more than one computer to your HP PSC by using a
powered hub. Both computers must have the HP PSC software installed.
Connect each computer to the hub, then connect the hub to the HP PSC.
If you want to connect more than one computer to your HP PSC in a
networked environment, you can do so using an HP JetDirect 175x and
USB (Windows and Macintosh), but only print functionality will be
available for the HP PSC.
To use your HP PSC in a networked environment, you must install the
software that comes with the HP JetDirect 175x, which disables all HP PSC
functionality except printing.
If you have Internet access, you can get more information on using an
HP JetDirect 175x from the HP website at:
www.officejetsupport.com
remove and reinstall your hp psc software
Do not simply delete the HP PSC program files from your hard drive. Be
sure to remove them properly using the uninstall utility provided in the
HP PSC program group.
If you have already installed the HP PSC software,
uninstall that software, then install the HP JetDirect 175x
software.
You can have up to 10 client computers on the network
portion of the 175x and USB combination.