Write problems – HP dvd1270e DVD-Writer User Manual

Page 18

Advertising
background image

ENGLISH

Write Problems

Symptom

Possible Cause

Solution

Authoring software used
does not support your DVD
writer

Use the bundled software provided with

the DVD writer.

When other software is used, contact the

software supplier (or check the
appropriate website) to ensure that it
supports this DVD writer.

Disc inserted upside down

Reinsert the disc label side up.

Insufficient hard disk
capacity

Ensure that 1.2 to 2 times the capacity of

the write data is available on hard disk.
(Required capacity may vary according to
write method.)

No power

Ensure that the power cord is connected

securely (at all connections).

Cannot write to disc

IDE cable not properly
connected

Ensure that the IDE cable and connectors

are not damaged (check the pins
carefully), and both sides are connected.

Defective or damaged disc

Always use high-quality media.

Always handle discs with care and keep

them clean. Deep scratches, fingerprints,
or other contaminants on a disc’s surface
can cause errors.

Writing errors occur

Insufficient hard disk
capacity

Ensure that 1.2 to 2 times the capacity of

the write data is available on hard disk.
(Required capacity may vary according to
write method.)

DVD/CD media not
compatible with high speed

Use media rated for the highest speed

your drive can write.

Defective or damaged disc

Always use high-quality media.

Always handle discs with care and keep

them clean. Deep scratches, fingerprints,
or other contaminants on a disc’s surface
can slow down write speed.

Cannot write at highest
speed

Advertising