HP PL4245N 42 inch HD-ready Plasma Television - Manual (Page 55)

Specifications 49
Timing Mode Factory Settings
There are total of 17 default timing modes in factory setting listed in the table below:
Factory Setting Modes (RGB)
Number Resolution
Horizontal Horizontal
Frequency (kHz) Vertical
Frequency (Hz) Dot Frequency
Clock (MHz)
Remark
1 640×480 31.469 59.940 25.175 VGA
2 640×480 37.500 75.000 31.500 VESA
3 640×480 37.861 72.809 31.500 VESA
4 640×480 43.300 85.000 36.000 VESA
5 720×400 31.469 70.087 28.322 VGA
6 800×600 35.162 56.300 40.000 VESA
7 800×600 37.879 60.317 40.000 VESA
8 800×600 46.875 75.000 49.500 VESA
9 800×600 48.077 72.188 50.000 VESA
10 800×600 53.700 85.000 56.300 VESA
11 1024×768 48.363 60.004 65.000 VESA
12 1024×768 56.476 70.069 75.000 VESA
13 1024×768 60.024 75.000 78.750 VESA
14 1024×768 68.700 85.000 94.500 VESA
15 1280×720 45.106 60.142 76.500 VESA
16 1280 ™960 60.000 60.000 108.000 VESA
17 1280×1024 63.980 60.018 107.997 VESA
•
When the input signal exceeds the unit’s allowable range, a “Signal out of range” message is
displayed.
•
Refer to the Video Information menu in the OSD to ensure the correct format of the input signal.