American Audio Professional Preamp Mixer Q-2411 Pro - Manual (Page 10)

© American Audio ® - www.americanaudio.us - Q-2411 PRO Instruction Manual Page 10
For example; Assuming you have two compatible American Audio™ CD players or a
compatible dual CD player connected to channels one and two. When the Fader "Q" Start
option is turned on, sliding the crossfader to the far left position will trigger playback on CD
player 1. When the crossfader is pushed to the far right position, playback on CD player 2 will
begin, and CD player 1 will return to the cue position. Refer to your American Audio CD player
user manual for setting CUE POINTS. Turn the ON/OFF BUTTON to the OFF position (RED
LED IS NOT LIT) to disengaged “Q” Start function and resume to a normal fader.
16. FEATHER FADER PLUS CROSSFADER - This fader is used to blend the output signals of chan-
nels one and two together. When the fader is in the full left position (channel 1), the output signal of
channel one will be controlled by the master volume level. The same fundamentals will apply for chan-
nel two. Sliding the fader from one position to another will vary the output signals of channels one
and two respectively. When the crossfader is set in the center position, the output signals of both the
channels one and channels two will be even.
17. MIC 1 ON/OFF BUTTON - This button is used to turn Microphone 1 “On” or “Off”.
18. MIC 2 ON/OFF BUTTON - This button is used to turn Microphone 2 “On” or “Off”.
19. MIC 2 VOLUME CONTROL - This knob controls the output volume of MICROPHONE 2 (22).
However, master volume is controlled by the MASTER VOLUME CONTROL (11).
20. MIC 1 VOLUME CONTROL - This knob controls the output volume of MICROPHONE 1 (1).
However, master volume is controlled by the MASTER VOLUME CONTROL (11).
Q-2411 PRO FRONT PANEL - CONTROLS AND FUNCTIONS CONT.