HP Wireless HDTV Connect Kit - Manual

1
TV adapter
2
PC adapter
3
USB cable
4
USB splitter cable
5
HDMI cables (2)
6
Power adapter
7
Adapter stands (2)
8
PC adapter clip
Contents • Contents
1
Reset button
2
HDMI ports (2)
3
Power/upgrade port
4
Menu button
5
Power connector
6
Source button
7
Upgrade port
8
Power lights
9
Link status lights
:
Wireless antenna
Components
Components
1
TV adapter
2
PC adapter
3
USB cables
4
USB splitter cable
5
HDMI cables (2)
6
Power adapter
7
Adapter stands (2)
8
PC adapter clip
Note: You may need to upgrade
the software on your adapters to
ensure compatibility with devices
produced by other manufacturers.
When it’s available, you can
download updated software
with installation instructions from
http://www.hp.com/support.
1
Reset button
2
HDMI ports (2)
3
Power/upgrade port
4
Menu button
5
Power connector
6
Source button
7
Upgrade port
8
Power light
9
Link status light
:
Antenna
Note: You may need to upgrade
the software on your adapters to
ensure compatibility with devices
produced by other manufacturers.
When it’s available, you can
download updated software
with installation instructions from
http://www.hp.com/support.
Wireless HDMI
Quick Setup
Wireless HDMI
Quick Setup
Regulatory and Safety Notices
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not
expressly approved by HP may void the user’s authority to operate the equipment.
Cables
To maintain compliance with FCC Rules and Regulations, connections to this device must be made with
shielded cables having metallic RFI/EMI connector hoods.
Declaration of Conformity for products marked with the FCC logo (United States
only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired opera-
tion.
If you have questions about the product that are not related to this declaration, write to
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, TX 77269-2000
For questions regarding this FCC declaration, write to
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, TX 77269-2000
or call HP at 281-514-3333
To identify your product, refer to the part, series, or model number located on the product.
Products with wireless LAN devices or HP Mobile Broadband Modules
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC
radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for
human contact is minimized during normal operation of tablet PCs and notebook computers.
To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas
should not be less than 20 cm (8 inches), including when the computer display is closed.
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation
in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency
range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to cochannel mobile satellite
systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz
bands. These radar stations can cause interference with and/or damage to this device.
In some environments, the use of wireless devices may be restricted. Such restrictions may apply in hospitals,
near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of
this product, ask for authorization to use it before you turn it on.
FR
FR
FR
FR
FR