Document Outline

• Table of contents
• 1 Product Features
• 2 Safety and Maintenance Guidelines
  • Important Safety Information
  • Safety Precautions
  • Maintenance Guidelines
    • Cleaning the Monitor
      • 1. Turn off the monitor and unplug the power cord from the back of the unit.
      • 2. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.
      • 3. For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol. Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface.
    • Shipping the Monitor
      • 1. Disconnect the power and video cables from the monitor.
      • 2. Lay the monitor on a flat and even surface with the bottom side of the monitor extending over the edge of the surface.
      • 3. Slide the base latches outwards to release the base lock.
        • Figure 2-1 Releasing the Base Latches
      • 4. Remove the base from the monitor.
      • 5. Place the monitor and the base in the original packaging box.
  • 3 Setting Up the Monitor
• 3 Setting Up the Monitor
  • Unpacking the Monitor
    • 1. Make sure all contents are included. Store the packing box.
    • 2. Turn off the computer and other attached devices.
    • 3. Prepare a flat area to assemble the monitor.
  • Installing the Base Stand
    • 1. Place the monitor on a flat and even surface with the bottom side of the monitor extending over the edge of the surface.
    • 2. Slide the base to the stand. The latches automatically locks in place.
    • Figure 3-1 Installing the Base Stand
  • Connecting Video Source Cables
    • Connecting the DisplayPort Cable
      • Figure 3-2 Connecting the DisplayPort Cable
    • Connecting the VGA Cable
      • Figure 3-3 Connecting the VGA video and audio cables
    • Connecting the HDMI Cable
      • Figure 3-4 Connecting the HDMI Cable
  • Connecting Audio Output Devices
    • Connecting a Subwoofer
      • Figure 3-5 Connecting a Subwoofer
    • Connecting a Digital Audio Device
      • Figure 3-6 Connecting the SPDIF Cable
    • Connecting a Headphone
      • Figure 3-7 Connecting the Headphone
  • Managing the Cables
    • Figure 3-8 Managing the Cables
  • Connecting the Power Cord
    • 1. Follow all electrical and power warnings.
    • 2. Connect the round end of the power cord to the monitor, and then connect one end of the power cord to the power supply and the other end to a grounded electrical outlet.
    • Figure 3-9 Connecting the Power Cord
  • High-Bandwidth Digital Content Protection (HDCP)
    • Turning on the Monitor
      • 1. Press the power button on the computer.
      • 2. Press the power button on the monitor.
  • HP Watermark and Image Retention Policy
  • Selecting Video Input Connectors
  • Activating Beats Audio
  • Adjusting the Tilt
    • 1. Face the front of the monitor and hold the base so that you do not topple the monitor while changing the tilt.
    • 2. Adjust the tilt by moving the top edge of the monitor either toward or away from you.
    • Figure 3-10 Tilt Adjustment
    • 4 Operating the Monitor
• 4 Operating the Monitor
  • Documentation and Software CD
    • Installing Drivers
      • Installing the monitor driver software from the CD
        • 1. Insert the CD in your computer CD drive. The CD menu appears.
        • 2. Select the language.
        • 3. Click Install Monitor Driver Software.
        • 4. Follow the on-screen instructions.
        • 5. Ensure that the proper resolutions and refresh rates appear in the Display Control Panel settings. For more information, see the Windows® operating system documentation.
      • Downloading updated drivers from the Internet
        • 1. Go to the HP Technical Support website at http://www.hp.com/support.
        • 2. Select your country/region.
        • 3. Select Support & Drivers.
        • 4. Enter the model number of your monitor. The software download pages for your monitor appear.
        • 5. Download and install the driver and software files by following the instructions on the download pages.
        • 6. Ensure that your system meets the requirements.
  • Control Buttons
    • Using the On-Screen Display (OSD)
      • 1. Make sure the monitor is on.
      • 2. To access the OSD menu, press the Menu button. The OSD Main Menu appears.
      • 3. To navigate through the Main or sub-menu, press the (Plus) button to scroll up, or the (Minus) button to scroll in reverse. The press the OK button to select the highlighted function.
      • 4. To adjust the scale of a selected item, press the or button.
      • 5. Select Save and Return. If you do not want to save the setting, select Cancel from the sub-menu or Exit from the Main Menu.
      • OSD Menu Selections
• Identifying Monitor Conditions
• Power-Saver Feature
• A Troubleshooting
  • Resolving Common Issues
  • Getting Support from the HP website
  • Preparing to Call Technical Support
  • Locating the Rating Label
• B Technical Specifications
  • ENVY 27 27-inch IPS Monitor
    • Table B-1: ENVY 27 Specifications
  • Preset Video Modes
    • Table B-2: Factory Preset Video Input Modes
    • Table B-3: HDMI High Definition Factory Preset Video Modes
  • Entering User Modes
  • LCD Monitor Quality and Pixel Policy
• C Agency Regulatory Notices
  • Federal Communications Commission Notice
    • Modifications
    • Cables
  • Declaration of Conformity for Products Marked with the FCC Logo (United States Only)
    • 1. This device might not cause harmful interference.
    • 2. This device must accept any interference received, including interference that might cause undesired operation.
  • Canadian Notice
  • Avis Canadien
  • Japanese Notice
  • Korean Notice
  • Power Cord Set Requirements
    • Japanese Power Cord Requirements
  • Product Environmental Notices
    • Disposal of Waste Equipment by Users in Private Household in the European Union
    • Chemical Substances
    • HP Recycling Program
    • Restriction of Hazardous Substances (RoHS)
    • Turkey EEE Regulation