HP Intelligent Provisioning - Manual (Page 8)

Creating a network share
To create a network share:
1.
Download the appropriate Scripting Toolkit SoftPaq from the Scripting Toolkit website at
(
http://www.hp.com/go/ProLiantSTK ).
2. Install the Scripting Toolkit SoftPaq on a common server that resides on the same network as
the servers to be deployed.
3. Share the folder in which you installed the Scripting Toolkit. Be sure that the account you use
has read and write access.
4. Create an empty directory called \DATA in the Scripting Toolkit folder for configuration files.
Captured files are stored in this directory.
HP also recommends installing the latest version of the HP Service Pack for ProLiant (SPP). To obtain
the most current SPP, see the SPP website at (
http://www.hp.com/go/spp ).
Adding drivers to Windows PE 2.1
The Scripting Toolkit contains HP drivers that are to be used with Windows PE 2.1. The drivers
are located in the hpDrivers directory of the Scripting Toolkit. Run the executable file in this
directory, and then click Extract to extract the drivers to a location to be used in the following steps.
You can add drivers to Windows PE either offline or online.
To add drivers offline:
8 Deployment using the Scripting Toolkit for Windows