HP Pavilion vf52 15 inch Flat Panel Monitor - Manual (Page 16)

12 user’s guide
Adjusting the “Clock/Phase”
Submenu
To adjust the “Clock/Phase” submenu you should
follow the steps below:
1 Bring-up the OSD “Main Menu”.
2 Use the ‘+’ or ‘—’ button to move (forward
or backward) to the clock/phase icon and
highlight it.
3 If ‘Clock’ is selected, you may use the ‘+’ or ‘—’
buttons to adjust the setting of clock. The fullness
of the graphic bar as well as the numerical value at
the right corner is changed accordingly.
NOTE: We recommend you perform the Auto
Setup first. And adjust the clock setting only if the
image looks incorrect.
If ‘Phase’ is selected, you may use the ‘+’ or ‘—’
buttons to adjust the setting of phase. The fullness
of the graphic bar as well as the numerical value at
the right corner is changed accordingly.
NOTE: We recommend you perform the Auto
Adjust before adjusting the phase.
If ‘Exit’ is selected, it will exit the “Clock/Phase”
submenu and go back to the “Main Menu”.
Adjusting the “Color” Submenu
To do adjustment in the “Color” submenu you
should follow the steps below:
1 Bring-up the OSD “Main Menu”.
2 Use the ‘+’ or ‘—’ button to move (forward or
backward) to the Color icon and highlight it.