HP Pavilion 23tm 23-inch Diagonal Touch Monitor - Manual (Page 10)

Connecting the cables
1. Lay the monitor panel face down on a flat surface covered by a clean, dry cloth.
2. Pull the cable cover off the rear of the monitor.
3. Depending on your configuration, connect either the DVI or HDMI video cable between the PC
and the monitor.
NOTE: The video mode is determined by the video cable used. The monitor will automatically
determine which inputs have valid video signals. The inputs can be selected by pressing the
Input button on the side panel or through the On-Screen Display (OSD) feature by pressing the
Menu button.
● For HDMI digital operation, connect the HDMI signal cable to the HDMI connector on the
rear of the monitor and the other end to the HDMI connector on your input device (cable
provided).
4 Chapter 2 Setting up and using the monitor ENWW