Deleting a tier in a pool – HP XP Racks User Manual
Page 149
4.
In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Deleting a tier in a pool
The Storage Administrator (Provisioning) role is required to perform this task.
To delete a tier in a pool, you must delete all the pool-VOLs in the tier to be deleted. When
pool-VOLs in the tier are empty, the appropriate tier is deleted.
If you delete a pool, its pool-VOLs (LDEVs) will be blocked. If they are blocked, format them before
using them.
You cannot delete the pool-VOL when:
•
Creating the pool.
•
Deleting the pool.
•
Increasing the pool capacity.
•
Decreasing the pool capacity.
•
Restoring the pool.
•
Stopping decreasing the pool capacity.
•
Changing the threshold.
•
Initializing the pool capacity.
•
Changing the external LDEV tier rank
Notes on deleting a tier in a pool
You cannot delete a pool-VOL under these conditions.
•
If the pool-VOL is deleted, the used capacity of the pool-VOL exceeds the pool threshold.
•
If the pool-VOL is deleted, the subscription rate of the total V-VOL capacity including the control
information exceeds the subscription limit. For details about the formula used to calculate the
required pages for one DP-VOL including the control information, see
.
•
If the pool-VOL with system area has less than 4.2 GB of free space. There must be 4.2 GB
of free space in the pool in order to delete the pool-VOL with system area.
Deleting the pool-VOL stops the tier relocation. The process resumes after the pool-VOL is deleted.
Procedure 9 To delete a tier in a pool
1.
In the Remote Web Console main window, in the Storage Systems tree, select Pool.
The pool name appears below Pool.
2.
Select the pool that contains the pool-VOLs to be deleted.
The pool information appears on the right.
3.
Select the Pool volumes tab and select all the pool-VOLs contained in the tier to be deleted.
You cannot delete a pool-VOL unless Shrinkable has been applied.
4.
Click Shrink Pool.
5.
In the Shrink Pool window, verify the changes.
The details of Before Shrinking and After Shrinking, including the pool capacity, the used
pool capacity and the free pool capacity, appears in Prediction Result of Shrinking.
Managing pools and THP V-VOLs
149