HP XP Racks - Manual (Page 411)

Added LUNs table
Description Item
LDEV identifier, which is the combination of LDKC, CU, and LDEV. LDEV ID
Name of the LDEV. LDEV Name
Identifier of the parity group. Parity Group ID
Pool names and pool identifiers. Pool Name (ID)
If the LDEV is not used as a pool-VOL, a hyphen (-) appears.
Emulation types for each logical volume (or logical device). Emulation Type
Size of each logical volume. Capacity
Provisioning types for each logical volume. Provisioning Type
• Basic: Internal volume.
•
External: External volume.
• THP: V-VOL of Thin Provisioning.
•
Snapshot: Fast Snap volume.
Displays the attribute of the LDEV. Attribute
• Command Device: Command device.
•
Remote Command Device: Remote command device.
• -: Volume in which the attribute is not defined.
Number of assigned LUNs. LUN ID ((number of LUNs) Sets of
Paths)
Name of the port and the host group of assigned LUNs. This item appears
according to the number of assigned LUNs. port ID / host group name
To change the LDEV name setting, select an LDEV and then click this button. Change LDEV Settings
To change the LUN setting, select the check box in the table column of port
ID
/host group name, select the target LDEV, and then click this button.
Change LUN IDs
Add LUN Paths Confirm window
Confirm proposed settings, name the task, and then click Apply. The task will be added to the
execution queue.
Add LUN Paths wizard 411