HP XP Racks - Manual (Page 52)

4. In the Change SSIDs window, type the new SSID, and then click OK.
5. In the Edit SSIDs window, click OK.
6. In the Create LDEVs window, click Finish.
7. In the Confirm window, click Apply.
The new SSID is registered.
If Go to tasks window for status is checked, the Tasks window opens.
Changing LDEV settings
The Storage Administrator (Provisioning) role is required to perform this task.
Before registering an LDEV, you may need to change the LDEV settings.
1.
In the Create LDEVs window, in the Selected LDEVs table, select an LDEV, and then click Change
LDEV Settings.
2. In the Change LDEV Settings window, you can change the setting of LDEV Name, Initial LDEV
ID, or MP Blade.
•
If you change LDEV Name, specify the prefix characters and the initial number for this
LDEV.
•
If you change Initial LDEV ID, specify the number of LDKC, CU, LDEV, and Interval. To
confirm used LDEV IDs, click View LDEV IDs to confirm the used LDEV IDs in the View
LDEV IDs window.
•
If you change MP Blade, click the list and specify the MP blade ID. If the specific MP
blade is specified, select the MP blade ID. If any MP blade is specified, click Auto.
3. Click OK.
4. In the Create LDEVs window, click Finish.
5. In the Confirm window, verify the settings, and then click Apply.
The settings are changed.
If Go to tasks window for status is checked, the Tasks window opens.
Removing an LDEV to be registered
The Storage Administrator (Provisioning) role is required to perform this task.
If you do not want to register an LDEV that is scheduled to be registered, you can remove it from
the registration task.
1.
In the Selected LDEVs table in the Create LDEVs window, select an LDEV, and then click Remove.
A message appears asking whether you want to remove the selected row or rows. If you want
to remove the row, click OK.
2. Click Finish.
3. In the Confirm window, click Apply. The LDEV is removed from the registering task.
If Go to tasks window for status is checked, the Tasks window opens.
Blocking LDEVs
The Storage Administrator (Provisioning) role is required to perform this task.
Before you format or shred a registered LDEV, the LDEV must be blocked. You can use this procedure
to block internal and external volumes from any of these tabs.
•
LDEVs tab when you make a selection from Parity Groups.
•
LDEVs tab when you select Logical Devices.
•
Virtual Volumes tab when you select a Pool.
52 Configuring custom-sized provisioning