Assigning an mp blade, Assigning an mp blade to a resource, Changing the mp blade assigned to an ldev – HP XP Racks User Manual
Page 59
2.
Click Format LDEVs.
When you select one of the following tabs, click More Actions and select Format LDEVs.
•
LDEVs tab, which appears when Logical Devices is selected from the Storage System tree.
•
Virtual Volumes tab, which appears when a pool from Pools in the Storage System tree
is selected.
3.
In the Format LDEVs window, select the format type from the Format Type list, and then click
Finish.
In the Confirm window, click Next to go to the next operation.
4.
Click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Assigning an MP blade
Assigning an MP blade to a resource
The Storage Administrator (System Resource Management) role is required to perform this task.
You can assign a MP blade to resources (logical devices, external volumes, and journal volumes).
1.
In the Remote Web Console main window, in the Storage Systems tree, select Components.
2.
In Components, select the name of the DKC for which you want to assign a MP blade.
MP blades can be viewed in the MP Blades tab.
3.
Select a MP blade for which you want to change the settings, and then click Edit MP Blades.
4.
In the Edit MP Blades window, disable or enable Auto Assignment.
The default value depends on the value set for the selected MP blade.
•
Select Enable if the MP blade can be automatically assigned.
•
Select Disable if the MP blade cannot be automatically assigned.
5.
Click Finish.
6.
In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Changing the MP blade assigned to an LDEV
The Storage Administrator (System Resource Management) role is required to perform this task.
1.
In the Remote Web Console main window, in the Storage Systems tree, select Logical Devices.
LDEVs are shown in the LDEVs tab.
2.
Select the LDEV for which you want to change the MP blade.
3.
Click More Actions, and then select Assign MP Blade.
4.
In the Assign MP Blade window, specify the MP blade in MP Blade.
5.
Click Finish.
Assigning an MP blade
59