HP SAN - Manual (Page 13)

NOTE:
Once you have removed all the obsolete SAN components, you cannot open it using SAN Designer
1.3 or earlier. You can only open the file using SAN Designer 1.5.
Figure 3 Opening SAN Design containing obsolete SAN components
.
If the SAN Design profile created using SAN Designer 1.3 or earlier contains SAN components that
are not supported by SAN Designer 1.5, you will be prompted to redesign the SAN by replacing
them with alternate SAN components, as shown in
Figure 4 . Click Yes to remove unsupported SAN
components and open the file in SAN Designer 1.5.
NOTE:
Once you have replaced all the unsupported SAN components, you cannot open it using SAN Designer
1.3 or earlier. You can only open the file using SAN Designer 1.5.
Figure 4 Opening SAN Design containing unsupported SAN components
.
Specifying server details
The Select Server/Blade window displays details of servers and blade systems in the SAN. Figure 5
shows the Select Server/Blade Window.
HP StorageWorks Essentials SAN Designer 1.5 User Guide 13