1 setup, Shipping carton contents, Installing an hp bladesystem c-class enclosure – HP StorageWorks All-in-One SB600c Storage Blade User Manual
Page 11: Hp bladesystem c7000 enclosure
1 Setup
In this section:
• Shipping carton contents
• Installing an HP BladeSystem c-Class enclosure
• Installation guidelines
• Installing the HP AiO SB600c Server and Storage Blades
Shipping carton contents
When unpacking the HP All-in-One SB600c Storage Blade Solution, check for the following items:
•
HP Storageworks SB600c server blade
•
HP StorageWorks SB600c storage blade
•
Local I/O cable
•
Documentation Kit, Safety and Disposal Documentation CD
•
HP StorageWorks AiO Storage Blade System Recovery DVD
•
End User License Agreement
Documentation is also available in the following locations:
•
Documentation CD that ships with the enclosure
•
HP Business Support Center website
•
HP Technical Documentation website
Installing an HP BladeSystem c-Class enclosure
Before performing any procedures specific to the HP AiO SB600c Storage Blade Solution, install
an HP BladeSystem c-Class enclosure.
IMPORTANT:
If your HP AiO SB600c Storage Blade Solution is factory-integrated, the server and storage blades are
pre-installed in an HP BladeSystem c-Class enclosure. For instructions on connecting the enclosure to the
network and powering it on, see the installation guides that are shipped with the enclosures.
HP BladeSystem c7000 Enclosure
The colors correspond to a partner bay; for example 1 and 2 are in one partner bay.
All-in-One SB600c Storage Blade Solution
11