HP 3PAR Recovery Manager Software for Hyper-V - Manual (Page 11)

Table 2 Diagnostics checks for RMH (continued)
Parameters Diagnostics checks
Checks only for RMH Agents: LUN Details
1. Available copyspace in LUN
2. All VM associated LUNs must be HP 3PAR LUNs
Checks for both RMH Server and Agents: RMH Information
1. RMH install path
2. RMH install path drive type
3. RMH log level value
4. RMH log path
5. RMH session timeout value
6. RMH StoreServ timeout value
7. Port
8. Is RMH Server check
9. Is RMH Agent check
Checks only for RMH Server:
1. Service check for the RMH Server
Checks only for RMH Agents:
1. Service check
Checks only for RMH Agents: Software Settings
1. CLI Version on RMH Agents
2. HP 3PAR VSS Provider installed on RMH Agents
Checks for both RMH Server and Agents: System Information
1. System Name
2. Windows version for:
• RMH Server
• RMH Agent
3. Processor
4. Processor Type
Viewing diagnostics test status
The Diagnostics Tool displays the following details during diagnosis:
•
Target Application
•
Executed\Total Number of Servers
•
Target Server
•
Tests Executed
•
Total Number of Tests to be Executed in this Server
The RMD Tool displays details of the checks executed on selected servers. A green check mark
against a test indicates that the test execution is complete. A red cross indicates that the test
execution is not complete.
NOTE: The green check mark indicates that the test execution is complete. However, this does
not imply that the test result is always successful.
Viewing diagnostics test status 11