HP iPAQ hw6500 Unlocked Mobile Messenger series - Manual (Page 66)

Using the Phone Features 5–19
2. Under Network selection, select Manual and select the network
you want to use.
NOTE: When your current network is unavailable, tap Select
Network, and manually select a different network to use.
NOTE: In the event you are unable to locate a network, you must reset the
HP iPAQ by tapping Start > Settings > Phone > Network tab and
under Network Selection, tap Automatic > Find network.
Configuring Your HP iPAQ for Your SIM Card
When the SIM card connects to your service provider’s network, it may be
updated by your service provider to include new network parameters for
faster connection. The GSM/GPRS Settings Manager automatically
updates your HP iPAQ files with the new network parameters on your
SIM card.
At times, you may need to manually edit the network settings or create
your own personal network settings. To do that, you will need to modify
the GSM/GPRS Settings.
The GSM/GPRS Settings Manager has the following features:
•
Automatically detects the carrier and sets up the GPRS, MMS, and
WAP connection information.
• Automatically detects the carrier and updates network settings on
all hard and soft resets.
• Provides the User with the ability to edit network settings including
GPRS, CSD, SMS, MMS, and WAP information.
• Provides the User with the ability to create their own network
settings and save them under a user defined name in the
iPAQ File Store folder.
Modifying the GSM/GPRS Network Settings
The first time you use your SIM Card, the GSM/GPRS Manager
automatically detects the phone network and operator and sets up the
GPRS connection information for you. You can modify these settings to
your own preference or create your own network settings.
NOTE: If the automatic network detection fails, you can manually
relaunch it by pressing the Automatic detection button on the GSM/
GPRS Parameters screen.