What if – HP Deskjet 695c Printer User Manual

Page 46

Advertising
background image

27

Put the paper in the lower (IN) tray so that the torn edge is at the top of the
stack, and facing into the printer.

Print your banner.

You’ll notice that the printer and banner paper go through some start-up
movements—don’t worry, it’s normal. Also, banner printing takes a while;
it might be several minutes before you see the results.

After your banner prints, press Resume

as many times as needed until all

the banner paper is out of the printer.

Torn edge

Resume

button

What If

You get a message that
says you’re out of
paper, but you’re not

You did not push in the
paper-length adjuster all
the way. Make sure it’s
snug against the paper, and
then try printing again.

The text is fuzzy after
printing a banner

If the print quality seems
especially poor when you
switch from banner
printing, you might have
forgotten to reset the
printer for cut-sheet paper.

Advertising