HP Officejet 7500A Wide Format e-All-in-One Printer - E910a - Manual (Page 136)

The printer prints half a page, then ejects the paper
Check the ink cartridges
Make sure the correct ink cartridges are installed and the ink cartridges are not low on
ink. For more information, see Printer management tools and Check the estimated ink
levels.
HP cannot guarantee the quality of non-HP ink cartridges.
Paper mismatch
Check the settings
Verify that the loaded media size and type matches the control panel settings.
Copy A3/11x17 animation did not display
Make sure you touch the A3/11x17 box on the Copy screen.
Solve scan problems
If the following topics do not help, see HP support for information about HP support.
NOTE: If you are starting the scan from a computer, see the software Help for
troubleshooting information.
• Scanner did nothing
• Scan takes too long
• Part of the document did not scan or text is missing
• Text cannot be edited
• Error messages appear
• Scanned image quality is poor
• Scan defects are apparent
• Scan A3/11x17 animation did not display
Scanner did nothing
• Check the original
Make sure that the original is placed on the scanner glass correctly. For more
information, see Load an original on the scanner glass.
• Check the printer
The printer might be coming out of PowerSave mode after a period of inactivity, which
delays processing a short while. Wait until the printer displays the Home screen.
• Check the HP software
Make sure the HP software provided with the printer is correctly installed.
Chapter 8
132 Solve a problem