HP SAN - Manual (Page 23)

HP StorageWorks SAN Designer user guide 23
Figure 9 shows the Request Report window.
Figure 9 Request Report window
Click on the Send button to send your design requirements to HP. On receipt of your SAN design
requirements, HP sends an automated response to the e-mail address specified in the Contact Information
window. If the SMTP server information is not available in the Contact Information window, HP
StorageWorks SAN Designer selects the default mail client to send e-mail. Attach your design requirements
to the e-mail and send it to [email protected] .
NOTE: If you do not receive an automated response, verify your e-mail address in the Contact Information
window and send your report again.
Viewing reports
HP processes the data in the SAN design and sends you a report as an attachment. The report is saved as
a
.hppd
file.
NOTE: To view a processed report, you must open the report on a system that has HP StorageWorks SAN
Designer software installed.
To view a processed report, complete the following steps:
1. Double click the e-mail attachment and select Open. Figure 10 shows the Opening Mail Attachment
window.