HP ProLiant DL980 G7 Server - Manual (Page 21)

In all of the optimization pages, HP ESO displays the following values or controls:
•
N/A
⇒ No recommendation can be provided for the parameter at the current state and
environment.
•
Current Value
⇒ The current parameter value discovered in the system.
•
Recommended Value
⇒ The parameter value recommended by HP ESO.
•
New Value
⇒ This field contains the new parameter value to be applied to the system. By
default, this field contains the recommended value. However, you can change this value if
desired.
•
SET ALL button ( )
⇒ Sets all of the parameters shown in the New Value fields on the
page. Click this button to make the changes take effect immediately. Changes requiring a
system or SQL Server service restart are indicated after the changes are applied.
•
SET button ( )
⇒ Sets the specific parameter shown beside it. Click this button to make
the change take effect immediately. Changes requiring a system or SQL Server service restart
are indicated after the change is applied.
•
Enable Parameter Change check box ( )
⇒ When checked, allows the corresponding
parameter to be changed. When unchecked, the parameter retains its current value after
clicking the SET or SET ALL buttons.
•
Select/Unselect All check box ( )
⇒ When checked, causes the parameter changes
enablement check boxes under its section to toggle between Selected and Unselected.
•
Expand and Collapse buttons ( and )
⇒ Expand or Collapse a section in a page.
When a critical error occurs, the page will display possible steps that can be taken. This is shown
in the following example.
Figure 21 Critical Error Page
Optimizations Pages 21