HP LUN Configuration Manager XP Software - Manual (Page 84)

84 HP StorageWorks LUN Configuration Manager XP: user’s guide
Starting VSC operations
The following procedure describes how to start VSC operations from the
Function Select window.
To start VSC operations:
1. Start and log in to the Remote Control software.
2. Connect to the desired controller.
The Option Select window opens automatically.
3. Select Volume Size Configuration to start VSC operations.
The VSC warning message appears to remind you that VSC opera-
tions (except Install CV) are destructive.
4. Select OK to continue.
The Function Select window now opens.
5. Select one of the VSC functions:
Refer Configuration View the current VSC of the connected disk
array. You cannot request changes.
Normal Volume Convert a normal volume to a VSC volume.
Install CV Define a new CV under a CV volume. This
operation can only be performed on an existing
CV volume.
Deinstall CV Deinstall a CV.
CV to Normal Volume Convert a CV volume back to a normal volume.