HP Deskjet 642c Printer User Manual
Page 43
43
3
Load a stack of up to 30 cards in the IN tray.
Make sure the right edge of the card stack rests against the
raised card guide.
4
Lower the handle of the paper length adjuster so that it
doesn’t interfere when replacing the OUT tray.
5
Slide the paper adjusters so that they fit snugly against the
cards.
6
Replace the OUT tray.
You might need to lift the top cover a little to do this.
7
Print the cards.
After printing, remember to:
•
Return the card guide to the down position.
•
Remove any cards from the IN tray and replace them with
whatever paper you’ll be printing on next.
•
Reset the software for the paper you’ll be printing on next.
Note:
When printing JIS #4 (90 x 205 mm) envelopes,
make sure the flap is up and toward you.
Press the lower-inside
portion of the handle
to release it.
Short edge forward