Nilfisk-ALTO S-8 - Manual (Page 20)

19
8. TECHNICAL SPECIFICATION
Mono input channels
Microphone input electronically balanced, discrete input configuration
Frequency response 10Hz to 55kHz, +
3dB
Distortion (THD & N) 0.005% at + 4dBu, 1kHz
Gain range 0dB to 60dB (MIC)
SNR (Signal to Noise Ratio) 115dB
Line input electronically balanced
Frequency response 10Hz to 55kHz, + 3dB
Distortion (THD & N) 0.005% at + 4dBu, 1kHz
Sensitivity range +15dBu to 45dBu
Stereo input channels
Line input unbalanced
Frequency response
10Hz to 55kHz, 3dB +
Distortion (THD & N) 0.005% at +4dBu, 1kHz
Impedances
Microphone input 1.4kOhm
Channel Insert return 2.5kOhm
All other inputs 10kOhm or greater
Tape out 1kOhm
All other output 120Ohm
Equalization
Hi shelving + 15dB @12kHz
Mid bell + 12dB @2.5kHz
Low shelving + 15dB @80Hz
Low Cut filter 75Hz, 18dB/oct.
Main Mix Section
Noise (Bus noise) Fader 0 dB, channels muted: 100dBr (ref.:+4dBu)
Fader 0dB, all input channels assigned
and set to UNITY gain: 90dBr (ref.:+4dBu)
Max output +22dBu balanced XLR,
+22dBu unbalanced, 1/4" jacks
AUX Return gain range OFF to +20dB
AUX Sends max out +22dBu
Power supply
Main voltage USA/Canada 100 120V~, 60Hz
Europe 210 240V~, 50Hz
U.K./Australia 240V~, 50Hz
Power Consumption 18W
Fuse 100 120V~ : T500mAL
210 240V~ : T250mAL
Main connection Standard IEC receptacle
Physical
Net weight 2.4Kg (5.29lb)
Shipping weight 3.5Kg (7.72lb)
Dimension (W D H) 245mm 268mm 24/73mm (9.64" 10.54" 0.94"/2.87")