GE PVB94DTBB User Manual

Pvb94dt, Ge profile, Series 30" telescopic downdraft system

background image


Specification Revised 3/13

Listed by




GE Profile

Series 30" Telescopic Downdraft System

For answers to your Monogram


or GE



questions, visit our website at
or call GE Answer Center


service, 800.626.2000.

Venting Options (in inches)

Through the Floor

In Cabinet Discharge (Down)

In Cabinet Discharge (Right)

In Cabinet Discharge (Left)

Note: Telescopic downdraft vents are not
recommended to be installed with cooktops that are
flush mounted.

Approved for use with the following GE Profile


GE cooktops–30" electric models, 30” gas sealed
burner models and 30" induction models.

Not Approved for use with standard burner gas


Note: The cooktop must be at least 26" deep with a
flat surface area of 23-1/2" or more, front to back. In
addition, other clearances to the front edge of the
countertop must be considered.

Note: Dimensions shown are for reference only. Before
cutting out countertop, refer to instructions packed with

downdraft and cooktop.

Note: Installation on cabinets/countertops against

the wall will not be possible in most applications.

Against the wall installations are limited to

dimension requirements. Refer to installation

instructions packed with product for further details.

JXRB67 Indoor Remote Accessory. Optional
accessory may be ordered for installation of motor
and blower assembly in an indoor remote location.

Dimensions and Installation Information (in inches)