GE PSB9100DFBB - Manual (Page 17)

Advantium Oven
Speedcooking
Advantium is already pre-set to cook
over 175 popular dishes.
1. Press the speedcook pad.
If no selection is made within
15 seconds, the display will revert
back to the time of day.
2. Turn the selector dial to select the
type of food category you want.
Press the dial to enter.
3. Turn the selector dial to select the
specific food (menu selection).
Press the dial to enter.
4. Turn the selector dial to select
amount, size, and/or doneness (if
required, the oven will prompt you).
Press the dial after each selection.
5. Once the display shows:
ADJUST TIME or START either press
start or the selector dial to start
cooking.
Turn the food over when the oven
signals TURN FOOD OVER (for certain
foods).
When the oven signals CHECK for
DONENESS, check to see if your food is
done to your liking (for certain foods).
To review settings during cooking,
press the selector dial.
If you enter an undesired selection at
any time, simply press the BACK pad
and re-enter the desired selections.
Using
speedcook
features
CAUTION:
When using speedcook programs, remember that the oven, door and
dishes will be very hot!
Prior to the first use of your oven, the clock must be set. See the Advantium Quick Start section.
Before you begin, make sure the turntable is in place. Use the non-stick metal tray and your own
glass or ceramic cookware, if needed.
The turntable must always be in
place when using the oven.
Put food directly on the non-stick
metal tray to speedcook.
SPEEDCOOK PRE-SET FOOD SELECTIONS:
■ Appetizers
■ Desserts ■ Pizza ■ Sandwich
■ Breads ■ Entrees ■ Potatoes ■ Seafood
■ Breakfast ■ Meats ■ Poultry ■ Side Dish
To use a
pre-set
speedcook
menu
■ Early in a speedcook program, you will see
OPTIMIZING COOK TIME on the display. The oven
automatically senses the electrical voltage level in your
home and adjusts the cooking time up or down for
proper cooking.
■ If the door is opened during cooking, the oven will stop
and PAUSE will appear in the display. Close the door
and press the START/PAUSE pad to resume cooking.
■ At anytime during cooking you can turn the selector
dial to change the cooking time. You can change
power levels by pressing POWER/TEMP.
■ To assure consistent cooking results, the oven may
adjust power levels downward if the oven is hot at the
beginning of a program.
■ At the end of cooking, the automatic fan may continue
to run for a short time to cool internal components.
■ To cook for additional time after a cooking cycle has
been completed, use the resume feature.
17
Cómo utilizar
las funciones
de cocción
rápida
PRECAUCIÓN:
cuando utilice los programas de cocción rápida, recuerde que el horno,
compuerta y los platos se ¡encontrarán muy calientes!
Antes de utilizar su horno por primera vez, se debe programar el reloj. Consulte la sección de Inicio rápido de
Advantium.
Antes de empezar, asegúrese que se encuentre colocada la base giratoria. Si es necesario, utilice la bandeja de
metal antiadherente y sus propios recipientes de cocina de cerámica o vidrio.