AT&T 2402 - Manual (Page 2)

B E F O R E Y O U B E G I N
1
About Handset Registration
• You must register this (and any other) handset with the base,
following the directions in “REGISTER THE HANDSET.” This handset is
compatible with telephone model 2462.
• The original handset that came with the base is automatically
registered as Handset 1.
• Additional handsets will be assigned Handset 2, Handset 3, Handset 4,
Handset 5, Handset 6, Handset 7, and Handset 8.
• Whenever you install a handset battery pack, the handset will display
SEARCHING FOR BASE (if it’s registered) or ENTER BASE ID (if it’s
not registered).
About Softkeys
• The handset softkeys are located below the screen display.
• Press the softkey below the operation displayed on the screen to
select that operation. (For example, to enter the menu, press the
center softkey).
• Press
O (CLEAR) at any time to return to the previous screen.
• Press and hold
O (CLEAR) to return to the idle screen.
Softkeys
Screen
display of
operations to
be selected
with softkeys.
2402_map_2ATT 5/7/02 6:32 PM Page 1