Alloy Computer Products Network Device BWS-136 - Manual (Page 13)

BWS-136 User Manual_amend.doc - 25 -
converted file is available in the Upload binary file to device dialog
box. Press Upload and the Web Page Binary files will be upload to
server. Manager Utility uses tftp protocol to upload web page.
Before uploading the web page, please check if there is any anti virus
program which could prevent the tftp file transfer. Shut down the anti
virus program first to allow manager.jar upload the binary file.
BWS-136 User Manual_amend.doc - 26 -
5
Serial/Telnet Command
Overview
BWS-136 provides a set of ASCII command to configure Aport
through a serial and Ethernet port. User can use serial terminal or
Telnet command to configure BWS-136 when Web browser and
Java utility are available. In addition, these functions provide
user the most convenient way to develop their own configuration
utility software simply to use the ASCII command.
Serial Console Mode
To enter the Serial console mode, you can switch SW1 (4~5) to
ON position and then serial port will function as a console port.
The READY LED will keep flash that indicates BWS-136 is in
serial console mode. Please set the serial data setting of the Serial
Terminal software (such as Hyper Terminal) to be the same as the
BWS-136 serial port. If you forgot the serial port setting, you can
use SW1 to reset it to factory default setting as use following
setting:
Baud rate: 19200
Data Format: N,8,1 ( Parity, Data bits, Stop bits)