GE ZIPS360NZ - Manual

OVERALL DIMENSIONS
Product Specification Created 1/14
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply
is required. An inidividual properly grounded
branch circuit or circuit breaker is recommended.
Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 84" (213.4 cm)
Overall Depth 25 13/16" (65.6 cm)
Door Clearance 18 1/8" (46 cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height 84" (213.4 cm)
Cutout Depth 24" (61 cm)
Electrical Requirements 115 V AC, 60 Hz
20 amp circuit
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 646 lb
ZIPS360NZ GE Monogram ® 36" Built-In French-door Bottom-freezer
36"
(91.4)
*73 3/8"
(186.37)
*26 9/16"
(67.4)
9/16"
(1.4)
5/8"
(1.6)
9 11/16"
(24.6)
*24 15/16"
(63.4)
44 1/4"
(112.4)
*84"
(213.4)
28 3/16"
(71.6)
2"
(5.08)
25 13/16"
(65.56)
23 13/16"
(60.48)
*83 1/2"
( 212.1)
*4 5/16"
(10.95)
35" (89)
Case width
**130° Door swing
Doors can be adjusted to
90° door swing
18 1/8"
(46)
4" min to wall
(10.16)
4" min to wall
(10.16)
FRONT VIEW
ZIPS360NZ
TOP VIEW
(SHOWING DOOR SWING)
SIDE VIEW
**11 7/8"
(30.2)
**11 7/8"
(30.2)
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
* Shipping height. Use leveling legs and wheels for
maximum 1" height adjustment from shipping height.