Save these instructions, Warning, Grounding instructions adapter plugs – GE ZEM115SFSS User Manual

Page 10

Advertising
background image

10

SAVE THESE INSTRUCTIONS

This appliance

must be grounded.

In the event of an

electrical short circuit,

grounding reduces

the risk of electric

shock by providing an

escape wire for the

electric current.

This appliance is equipped with a power cord

having a grounding wire with a grounding plug.

The plug must be plugged into an outlet that is

properly installed and grounded.
Consult a qualified electrician or service

technician if the GROUNDING INSTRUCTIONS are

not completely understood, or if doubt exists as

to whether the appliance is properly grounded.

If the outlet is a standard 2-prong wall outlet,

it is your personal responsibility and obligation

to have it replaced with a properly grounded

3-prong wall outlet.
Do not under any circumstances cut or remove

the third (ground) prong from the power cord.
We do not recommend using an extension

cord with this appliance. If the power cord is

too short, have a qualified electrician or service

technician install an outlet near the appliance.

(See EXTENSION CORDS section.)
For best operation, plug this appliance into its

own electrical outlet to prevent flickering of lights,

blowing of fuse or tripping of circuit breaker.

Ensure proper

ground exists

before use.

WARNING!

Improper use of the grounding plug can result in a risk of electric shock.

Grounding

Instructions

Adapter

Plugs

Countertop Microwave Oven

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING

Usage situations where appliance’s power cord

will be disconnected infrequently.

Because of potential safety hazards under

certain conditions, we strongly recommend

against the use of an adapter plug. However,

if you still elect to use an adapter, where local

codes permit, a TEMPORARY CONNECTION may

be made to a properly grounded wall receptacle

by the use of a UL listed adapter which is

available at most local hardware stores.
The larger slot in the adapter must be aligned

with the larger slot in the wall receptacle to

provide proper polarity in the connection of the

power cord.

CAUTION: Attaching the adapter ground terminal

to the wall receptacle cover screw does not

ground the appliance unless the cover screw is

metal, and not insulated, and the wall receptacle

is grounded through the house wiring.
You should have the circuit checked by a

qualified electrician to make sure the receptacle

is properly grounded.
When disconnecting the power cord from the

adapter, always hold the adapter with one hand.

If this is not done, the adapter ground terminal

is very likely to break with repeated use. Should

this happen, DO NOT USE the appliance until a

proper ground has again been established.
Usage situations where appliance’s power cord

will be disconnected frequently.
Do not use an adapter plug
in these situations

because frequent disconnection of the power

cord places undue strain on the adapter and

leads to eventual failure of the adapter ground

terminal. You should have the 2-prong wall

receptacle replaced with a 3-prong (grounding)

receptacle by a qualified electrician before using

the appliance.

Ensure proper

ground and firm

connection before

use.

TEMPORARY

METHOD

Align large

prongs/slots

(Adapter plugs not

permitted in Canada)

Advertising