Advance planning for chimney hoods—island – GE ZV850SPSS User Manual
Page 5
monogram.com
55
c
him
n
e
y
h
ood
s
p
ro
fe
ssi
o
n
al
h
ood
s
c
u
sto
m
ho
o
d
i
n
se
rt
s
te
le
sc
o
pi
c
d
ow
n
d
ra
ft
v
e
n
ts
Advance planning for chimney hoods—island
Product dimensions and clearances
This stainless steel hood can be installed over any 30" or 36"
Monogram cooktop or range, including professional models.
Model ZV1050SFSS
* 20" for 8' ceiling using
supplied duct cover
32" for 9' ceiling using
ZX1059SFSS accessory
44" for 10' ceiling using
ZX10510SFSS accessory
This vent hood is supplied with a decorative duct cover to
reach 8' ceiling height, or between 7'11" and 8'1".
*9' to 10' ceilings may be 25-1/2" to 30" clearance.
This vent hood must be installed 25-1/2" minimum to 30"
maximum above the cooking surface.
The distance between the cooking surface and the bottom of the
hood must be at least 25-1/2". The 30" recommended installation
height above the standard 36" countertop will ensure duct
cover fit to the ceiling. For 9' and 10' ceiling heights, the hood
may be lowered to 25-1/2" over the cooking surface.
• When installing this island hood above a Monogram
professional range or rangetop, installation clearance must
be at least 30".
A mounting template is provided with the installation
instructions to help position the hood above the cooking
surface and to locate the mounting brackets.
Important: Clearances may vary due to type of cooking
product and local codes. Check with local inspectors to be
sure the standard is applicable.
605Dia153
10"
*Height
to Ceiling
42"
31-1/2"
605Dia172
*30"
Recommended
36" Min.
Using duct cover accessories
A duct cover accessory may be required for your hood
installation height. Use this chart to accurately determine
the need for a duct cover accessory.
10-3/4"
16"
ZV1050 duct cover dimensions
Accessory
A
B
Supplied
11-1/2"
12"
ZX1059SFSS
19"
20"
ZX10510SFSS
25"
26"
The serial plate is located behind the
removable filters.
ZV10S0SFSS installation heights
Actual
ceiling height
Possible hood
installation
height*
Duct cover
accessory
7' 11"
29"
Supplied
8' 0"
30"
8' 1"
30"
8' 2"
25-1/2" to 30"
A
cce
ssor
y Z
X1
05
9S
FS
S
8' 3"
25-1/2" to 30"
8' 3"
25-1/2" to 30"
8' 4"
25-1/2" to 30"
8' 5"
25-1/2" to 30"
8' 6"
25-1/2" to 30"
8' 7"
25-1/2" to 30"
8' 8"
25-1/2" to 30"
8' 9"
25-1/2" to 30"
8' 10"
25-1/2" to 30"
9' 0"
25-1/2" to 30"
9' 1"
25-1/2" to 30"
A
cce
ssor
y Z
X1
05
10
SF
SS
9' 2"
25-1/2" to 30"
9' 3"
25-1/2" to 30"
9' 4"
25-1/2" to 30"
9' 5"
25-1/2" to 30"
9' 6"
25-1/2" to 30"
9' 6"
25-1/2" to 30"
9' 7"
25-1/2" to 30"
9' 8"
25-1/2" to 30"
9' 9"
25-1/2" to 30"
9' 10"
25-1/2" to 30"
9' 11"
25-1/2" to 30"
10' 0"
25-1/2" to 30"
*Based on 36" countertop height.