GE ZIS480NX - Manual

OVERALL DIMENSIONS
Product Specification Created 3/14
ZIS480NX GE Monogram ® 48" Built-In Side-by-Side Refrigerator
*84"
(213.4)
48"
(121.9)
25 1/2"
(64.8)
23 7/8"
(60.7)
1 3/4"
(4.4)
*72 1/4"
(183.5)
*3 1/2"
(8.9)
*83 1/2"
( 212.1)
47"
(119.4)
Case width
28 5/8"
(72.7)
TOP VIEW
68 1/2"
(174.0)
*3 3/4"
(9.5)
ZIS480NX
SIDE VIEW FRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow
4"
(10.2) min
clearance to a wall for 90˚
door swing
** Allow
4"
(10.2) min
clearance to a wall for 90˚
door swing
** These refrigerators are equipped with a 2-position door stop. The factory-set 130° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
full 130° door swings for pan removal. If the 90° door stop position is used, pan access is
maintained, but pan removal is restricted.
** Allow
15"
(38.1) min
clearance for 130˚
door swing
** Allow
20"
(50.8) min
clearance for 130˚
door swing
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply
is required. An inidividual properly grounded
branch circuit or circuit breaker is recommended.
Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
SPECIFICATIONS
Overall Width 48" (121.92 cm)
Overall Height 84" (213.36 cm)
Overall Depth 25 3/8" (64.45 cm)
Door Clearance 28 5/8" (72.1 cm)
Cutout Width 47 1/2" (120.7 cm)
Cutout Height 83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 775 lb
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimension may vary due to manufacturing tolerances.
*84"
(213.4)
48" (121.9)
25 1/2"
(64.8)
23 7/8"
(60.7)
1 3/4"
(4.4)
*72 1/4"
(183.5)
*3 1/2"
(8.9)
*83 1/2"
( 212.1)
47"
(119.4)
Case width
28 5/8"
(72.7)
TOP VIEW
68 1/2"
(174.0)
*3 3/4"
(9.5)
ZIS480NX
SIDE VIEW FRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow
4"
(10.2) min
clearance to a wall for 90˚
door swing
** Allow
4"
(10.2) min
clearance to a wall for 90˚
door swing
** These refrigerators are equipped with a 2-position door stop. The factory-set 130° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
full 130° door swings for pan removal. If the 90° door stop position is used, pan access is
maintained, but pan removal is restricted.
** Allow
15"
(38.1) min
clearance for 130˚
door swing
** Allow
20"
(50.8) min
clearance for 130˚
door swing