Altec Lansing inMotion IM414V2 - Manual (Page 3)

1
Spread Your Sound Around Power
Congratulations on your purchase of the inMotion iM414 speaker system—
the portable system with an advanced Class D amplifier, surround effect
technology and crystal-clear speakers. Its sleek design cradles your Zune
player securely and attractively as it pumps out full-range, full-bodied sound
that fills the room. The inMotion system’s twin, bass-enhanced speakers
blend power and clarity. The built-in FM radio expands your listening
options while the wireless remote increases your freedom. You can plug in
the inMotion system for AC power, or use batteries to take the music with
you. So let the music out!
Box Contents
• inMotion digital speaker system
• Wireless remote
• Power supply
• User’s guide and quick connect instructions
iM414v2 model made for:
• Zune ™ 30GB, 80GB, 8GB, 4GB, Zune HD
Connecting Your Zune Player
Dock your Zune player by sliding it on top of the inMotion system docking
station. If provided, first install the docking adapter that came with the
inMotion system. While the docking adapter is not required for proper
functioning of your Zune player and inMotion system, it may provide a
better fit.
Use one of the following two options to power your inMotion system:
AC Power (wall outlet)
Insert the barrel connector from the power supply into the DC connector
on the rear of the inMotion system. After this connection is made, insert the
power supply into a wall outlet.
DC Power (battery)
Install 3 AA batteries (not included) into the battery compartments in
the rear of the inMotion system. Make sure the batteries are installed as
illustrated in the battery compartment.
Start Playing
1.
Turn on your Zune player.
2.
Turn on the inMotion system by pushing the button for
about 2 seconds. The LCD screen turns on.
3.
Press the “SOURCE” button until “Zune” is selected on the
LCD screen.
4.
Use the and buttons to navigate through your playlist.
NOTE: To avoid hearing a popping sound when you turn on your inMotion
system, always turn on your Zune player or other audio source first.
Power Off
Turn off the inMotion system by pushing the button. The LCD screen
turns off.