GE 45238 GE Wireless Decoy Security Camera - Manual (Page 5)

5
2. Secure the decoy camera to the wall by fitting the
mounting slots on the back of the camera onto the
screwheads in the wall.
3. Set ON/OFF switch on the battery to "ON" position.
Slide the camera onto the locking pins of the
battery pack.
4. Adjust antenna and camera angle
as desired.
TROUBLE SHOOTING
If you are having trouble operating this product, please
see below. If you have any questions or feel the decoy
camera is not operating correctly, or you simply need
additional information, please visit our web site
www.jascoproducts.com or contact technical support
at 1-800-654-8483
No flashing LED
1. Check battery installation. Make batteries match the
polarity diagrams located in the battery pack.
Caution
Requires 2 "AAA" cells. Observe polarity markings (+), (-).
-Batteries may leak harmful liquids or ignitable materials or explode
causing injury and product damage.
-Do not mix old and new or other battery types.
-Replace all batteries at the same time.
-Replace exhausted batteries immediately.
-Remove batteries if product is to be unused for extended periods
of time.