GE 83299 GE Video Converter FR Modulator with S-Video - Manual (Page 4)

4
CABLES REQUIRED TO CONNECT YOUR NEW RF MODULATOR
The following items (not supplied) are required to connect your RF
Modulator to a video input source and your TV.
• One audio/video cable with red, white, and yellow RCA connectors
(AV23216), or
• One audio cable with red and black RCA connectors (AV22607)
• One video cable with RCA connector (AV23319)
• One s-video cable (AV23244)
• Two 75 ohm coax cables with “F” type connectors (AV23217)
Note: The audio signal will be modulated to mono, whether the video
source is stereo or monaural.
Note: Enclosed 4 rubber feet can be attached to the product if you
want to use this RF modulator in a horizontal position.
Note to the CATV System Installer:
This reminder is provided to call the CATV system installer’s attention
to article 820-22 of the NEC which provides guidelines for proper
grounding and, in particular, specifi es the cable ground shall be con-
nected to the grounding system of the building, as close to the point
of cable entry as practical.