GE 20620 GE Universal Remote - Manual (Page 17)

17
1..
6... Press.and.hold.the. Original Remote button.(e.g..On-OFF).until.
the.green.indicator.blinks.once.and.stays.on..If.there.is.a.learn-
ing.problem,.the.green.indicator.blinks.for.three.seconds.and.
stays.on..If.this.happens,.repeat.Steps.4.to.6.
7... Repeat.Steps.4-6.for.other.buttons.you.want.to.learn.
8... Press.and.release.the
SETUP button.when.all.desired.remote.
commands.are.learned..Code.Learning.is.now.complete.
To Clear all Learned Commands under a mode
Clearing.learned.commands.is.helpful.if,.for.example,.you.replace.
your.CD.player.with.another.brand.or.model..If.you.had.learned.a.
feature.from.your.old.CD.player’s.original.remote.on.to.this.remote.
(such.as.RANDOM.PLAY),.that.feature.would.no.longer.work.for.your.
new.CD.player..Should.you.wish.to.remove.or.clear.one.or.more.
“learned”.commands,.follow.the.steps.below:
Learning Commands, cont.
2..
3..
4..
6..
Line up your remotes (that you’re learning from) in front of
the Learning remote, on a hard surface approx. 1 inch apart.