GE 20622 GE Universal Remote - Manual (Page 8)

8
Using Your Remote
Code Identification
The Code Identification Feature allows you to identify the four digit
library code stored under your device button. For example, if you
want to find out what four digit code is stored under your TV device
button, follow the six steps below:
1. Press and hold the SETUP button until the red
indicator stays on. Release the SETUP button.
2. Press and release the desired device button ( TV,
DVR, etc.). The red indicator blinks, then stays lit.
3. Press and release the SETUP button. The red
indicator blinks once and remains lit.
4. To find the first digit for the code stored under the
device button pressed in step 2, press each numeric
button from
0-9 in turn. The number that causes
the indicator light to blink is the first
digit in your code.
. To find the second digit, repeat step 4.
6. Repeat step 4 to find the third and
fourth digit.