GE 97769 GE Wired Dual Scroll Optical Mouse for PCs - Manual (Page 4)

4
CONNECTING YOUR MOUSE
1. If you are currently using a PS/2 mouse, shut down your
computer. This is not necessary if you are currently using a USB
mouse. (You must Shut down and turn off your computer
before connecting or disconnecting any PS/2 device.)
2. Disconnect the existing mouse.
3. Connect the USB plug of your GE Ergonomic Dual Scroll Mouse
to the USB port on your computer or hub.
4. If you turned off your computer, turn on your computer and start
your Operating System.
5. Move the mouse to ensure there is a good connection.
Note: Optical mice do not work well on very dark, glass or highly
reflective surfaces. If your mouse does not work properly, try a
different surface such as a plain white piece of paper.