GE 97930 GE Compact Flash and IBM MicroDrive Card Reader User Manual

Page 4

Advertising
background image

Windows® 2000, ME or XP & Mac® OS 9.X or 10.X

NO DRIVER IS REQUIRED.

1. Plug the card reader into a USB port on your computer or hub.

(Optionally you may choose to use the included USB extension
cable.)

2. Your computer will detect your card reader, and may load additional

drivers for it.

3. Insert your card into the card slot on your card reader. The card is

correctly inserted when the blue LED light remains on.

4. When you insert a card into the card reader it will show up as a new

removable storage drive on your computer. (This can be found with
“My Computer”.)


Note 1:
If the card is not able to be read or you incur an error, you may not have
allowed enough time for all of the additional drivers to load. Remove and
re-insert the card.

Note 2:
Do not force the card into any slot. The card must be inserted with the
correct orientation to avoid damage to your card and the card reader.

Advertising