Operation - chopping, Operation, Hints for working with the immersion blender – GE 898683 User Manual
Page 10
10
oPerATion - CHoPPing
danger:
• Unplug immediately after use, before removing or changing
attachments.
• keep hands and utensils away from the cutting blade while chopping
food to reduce the risk of severe injury to persons or damage to the food
chopper. A scrapper may be used but only when the food chopper is not
running.
OPERATION
• remove the power base
(4)
from the attached accessory
(1, 10 or 11)
.
• Processed food can be stored in the measuring cup
(8)
, if desired. To ensure that
the food stays fresh, put the lid
(7)
on the measuring cup (ill.
l
)
. Store in the
refrigerator.
•
WArnInG!
When blender is not in use, always unplug unit and store in a safe place
not accessible to children.
Hints for working with the immersion blender
• To avoid spilling over food, start with low speed (lo
(6)
), then switch over to high
speed (hi
(5)
).
• operate the blender for only as long as needed to reach the right consistency. Do
not operate the unit continuously for more that 30 seconds at a time. Let unit cool
for at least 2 minutes before next use.
• The measuring cup lid
(7)
can be used on both ends of the measuring cup
(8)
, either
as a lid to keep food fresh or as a non-skid base. The latter will be very useful if food
is processed directly in the measuring cup.
• Do not process food inside a pot with non-stick coating, as whisk
(9)
/blade assembly
(11)
might damage the coating.
898683 (Immersion Blender)-12.indd 10
12/20/10 11:17:46 AM