GE 169149 - Manual (Page 4)

KNOWING YOUR HEATED PARTY PLATTER
The Heated Party Platter comes with a dish that allows you to easily and efficiently keep
dips and sauces warm.
The box containing your Heated Party Platter should include the following parts:
1. Before assembling your Heated Party Platter for the first time, set the Main Body aside
and wash the round plate and center dish, as described in the CARE AND CLEANING
section of this manual. Use warm, soapy water on all parts except the Main Body,
which should be cleaned with a damp sponge or cloth. DO NOT immerse the Main
Body in water.
2. Dry all of the parts thoroughly before assembly.
3. Insert the power cord into the inlet socket. Set the Round Plate on the Main body.
Then, set the Center Dish in the middle of the Round Plate.
Make sure the switch of the Main Body is set to OFF and plug your Heated Party Platter
into an electrical outlet. Your Heated Party Platter is ready for use now.
Center dish
Round plate
Main body
Power cord
Switch
Socket
5
GE Platter_INTERIOR_BC (e-f-s) r3:Layout 1 7/5/07 4:43 PM Page 5