GE 169082 - Manual (Page 6)

6
make Coffee with whole Beans
1. Add beans: open the tank cover by pushing the release button and lifting up.
remove inner lid, unscrew the grinder box lid and remove grinder box. Fill the
grinder box with the desired quantity of beans according to the marks on the
inside of grinder box (see fig.1). Do not fill the grinder box with more than 60g/2 oz.
of beans.
Fig.1
The three marks
indicate coffee
bean quantity
which making
corresponging coffee.
Fig.2
Do not overfill or the grinder box may become blocked and/or the coffee maker
may overflow. Place the grinder box back into the coffee maker. note: the
connector groove must be locked into the motor shaft (see fig.2), otherwise the
grinder box will not be assembled properly and it may damage the grinder box.
note: the grinder box must be removed to add beans.
2. replace the grinder box cover (see fig.3). First place in the
“ ”
position, then
turn the grinder box lid clockwise until it locks into the
“ ” position, otherwise the appliance will not operate.
3. Fill the tank: Pour the desired amount of water in the tank using the indicator
marks on the inside of the cover (see fig.4), and the water level gauge located at
the right of the tank.
note: Before filling water, the inner cover must be assembled in place.